One of the most important components of your kitchen is not much bigger than a common dime. Yet you use it every time you turn on your kitchen faucet for cleaning, cooking, or just grabbing a quick drink of water. It’s called a faucet aerator. andit’s the little screen that’s attached to the end of your faucet. Invented not long after World War Two, its job is to provide you with excellent water pressure while saving you a small bundle when your water bill arrives.
But because a faucet aerator also acts as a water filter, it naturally traps dirt and calcium deposits which can cause clogs. That means every now and again you need to repair or even replace your aerator. While this might sound like an expensive task that only a licensed plumber can handle, think again. With the right tools, it’s highly probably that you can repair your faucet aerator all by yourself.
In fact, according to the professionals at Aerator.com, replacing your aerator is a simple and very affordable task that will significantly improve the efficiency, performance, and longevity of your faucet.
Here’s how to get the job done without having to spend money on a plumber.
Getting to Know Your Faucet Aerator
A recent report by Hunker states that one of the most common problems with aerators is they tend to collect dirt and mineral deposits which cause blockages, thereby reducing water flow and disturbing the normal steady stream. Lots of people confuse their clogged aerator for a problem with the sink or with the pipes. That’s when they make the mistake of calling a plumber who will have no choice but to charge the going rate for their services. But the reality is that a clogged aerator can be fixed for almost no cost at all, with the help of a pair of pliers and some vinegar.
Removal of the Clogged Aerator
You remove your clogged faucet aerator by unscrewing it. Once you accomplish that, you can separate it into it’s “component parts.” These generally include the following:
–The Outer Casing: this is the plastic or metal housing for which all the other parts fit.
?–The Inner Housing: this plastic component is said to slip into the outer casing.
–The Screen: this dime-sized filtering component fits onto a ridge contained within the housing. It is the primary working part of the aerator, and it often collects dirt and deposits.
?The Screen Bushing: this is the part that keeps the screen securely in place.
?The Washer?: situating on top of the bushing, this componentseals the faucet spout after you screw the housing back on.
Cleaning Your Clogged Aerator
According to Hunker, cleaning your aerator can take less than five minutes. Here’s how you go about it.
First, you’ll need a rag, pliers, a bowl, and some distilled white vinegar.
Turn off your faucet. Wrap the rag around the aerator to keep it protected, then grip it with the pliers and turn it counterclockwise until it loosens. Now use your fingers to remove the aerator.
Flip the aerator upside down. Turn the water back on and hold it under the stream of water. This process “back-flushes” the screen and, in turn, removes the loose dirt and sediment lodged inside it.
Next, you will remove the rubber washer. Set it in a safe place. Place your aerator in a bowl filled with white vinegar and leave it alone for 24 hours. The next day, you will find that the vinegar solution has dissolved the deposits that would not come off during the back-flushing process.
Finally, you’ll need to place the washer back in the housing andthen screw the aerator onto the faucet tip. Once again using the rag and the pliers, tighten the aerator threads to prevent leakage when you turn the water on. If the water happens to leak, tighten the aerator just a little bit more.
What you should have now instead of a clogged faucet is a steady stream of tap water along with optimum pressure for washing and cooking. You will also have saved a bundle by nothaving had to call in a licensed plumber to perform the simple task. Of course, if you find that your aerator is damaged, you will need to replace it with a new model. You can perform this task on your own, but if you find that it is too complex a procedure, you will need to call a plumber.


